logo

Gallery

ANSI B16.5 2 Inch Pipe Carbon Steel Flange Class125

  • ASME/ANSI B16 Standards for Pipes and Fittings

    The ASME B16 standards covers pipes and fittings in cast iron , cast bronze, wrought The ASME B16.5 - 1996 Pipe Flanges and Flange Fittings standard covers and markings for wrought factory-made butt-welding fittings in sizes NPS 1/2 . wrought carbon and alloy steel butt-welding short radius elbows and returns.

  • Hattersley Product Catalogue | hattersley

    ANSI B16.5 Steel pipe flanges and 2.ANSI Class 125 refers to cast iron only. 3.ANSI 600, 900, 1500 flange thickness flanges are shown in inches with the.

  • forged steel flanges - Garth Industrial

    Class 125 LW Slip-on . . the pipe often permits the use of inexpensive carbon steel flanges with corrosion . ASME/ANSI B16.5, titled “Steel Pipe Flanges and INCHES. MILLIMETRES. 1. Socket Welding Flanges, sizes NPS 3 1/2 (DN 90)

  • B16 Standardization of Valves, Flanges, Fittings, and Gaskets

    ASME is a non-profit organization that continues to develop and maintains nearly 600 codes B16.5 - Pipe Flanges and Flanged Fittings NPS 1/2 through 24. for wrought carbon and alloy steel factory-made buttwelding fittings of NPS 1/2 through This Standard covers cast Class 125 and 250 copper alloy threaded pipe

  • Flanged Ductile Iron Pipe and Fittings - Ductile Iron Pipe Research

    3- through 12-inch, and 150 psi and 250 psi for sizes 2. ANSI/AWWA C115/A21.15: “Flanged Ductile-. Iron Pipe with Ductile-Iron or Gray-Iron Flanged Fittings,” Class 125 only. 2. ASME/ANSI B16.5: “Pipe Flanges and Flanged. Fittings,” Class 150 only (Flat and 0.06-inch Flange bolts are typically low-carbon steel in.

  • Industrial Flange | Steel Flange Drawings - Texas Flange

    Texas Flange provides ASME and Non code industrial pipe flanges for the industries in Stainless Flanges, Alloy Flange and Carbon Steel flanges. Spec; AWWA; B16.1; B16.5; B16.47A; B16.47B; B16.48 TYPEE-1; B16.48 TYPEE-2

  • ANSI/ASME Flanges - Robert-James Sales, Inc.

    ANSI B16.5 Flanges. Weld Neck, Slip-On, Socket Weld, Threaded, Lap Joint, Blind. 1/2" - 24". PDF Class 125 - LW, AWWA C207 Class B, D Typical Facings for Steel Pipe Flanges–Dimensions Ductile Iron & Carbon Steel Flanges

  • Plate Flanges - Class 150 - Robert-James Sales, Inc.

    Stainless Steel Plate Flanges - Class 150. OD AND DRILLING for 1/2" through 24" pipe size's per ASME/ANSI B16.5-1996 Class 150 ? OD AND DRILLING for 30" & 36" pipe size per ASME/ANSI B16.1-1989 Class 125 150 lb. Slip on Plate Flange sizes chart. Notes: All dimensions are in inches unless otherwise noted.

  • Texas Flange - Gilson Engineering Sales

    28 Dec 2009 ANSI B16.5 - 150, 300, 400, 600, 900, 1500, 2500, Weights For Steel Pipe Flanges and Flanged Fittings 800 F, the carbide phase of carbon steel may be converted to graphite. 3. Socket Weld. Blind. Nom. Pipe. Size. O. T1. R. X. No.2/Dia. of Holes Dimensions in inches. Class 125 SO* (275psi).

  • class 150 flanges - Thermometrics Corp.

    Dimensions for Class 150 Flanges. Nom. Pipe. Size. (inches). O. Q. R. X 1/2. 3.50 .44. 1.38. 1.19. 4-0.62. 2.38. 1.88 .84 .62 .62 .88 .12 .62 .90 .38. 3/4 . tolerances in accordance with ANSI B16.5. Carbon steel flanges mechanical properties

  • American Waterworks (AWWA) C207 & C228 Pipe Flanges - Buford

    The original ANSI/AWWA C207 steel pipe flange specification was officially adopted in 1955. savings over common forged flanges (typically ANSI B16.5 hub type flanges) which Elongation: 2" - 18%; 8" - 14". Maximum Carbon .29% For flanges up to 84" holes are drilled 1/8 inch larger in diameter than the diameter of

  • MSS SP-44: Steel Pipe Line Flanges

    requests for steel pipe flanges for pipeline use, particularly in sizes larger than those covered by ANSI Standard the carbon steel grade, which necessitates special considerations for the welding end of the flanges. .. 3.3.2 Gasket dimensions for 1/16 inch sheet asbes- same as ASME/ ANSI B16.5 and Class 125 of.

  • Piping Design Part 1: The Basics - W M Huitt Co

    B16.5 - Pipe Flanges and Flanged Fittings (NPS 1/2 through. NPS 24),. B16.24 . the pipe, but use a less costly, e.g. carbon steel, Lap Joint. Flange. . inch. BOLTS, NUTS & GASKETS. Sealing the flange joint, and as you will see further in this article . under ASME B16.15, are available in Class 125 and 250, in sizes NPS

  • Dimensions and Technical Data - Lynco Flange

    ASME B16.5 Flanges; ASME B16.47 Large Diameter Flanges Dimensions of Ring Joint Facings: Classes 300,400 and 600 - 1/2" thru 6" · Classes 300,400

  • What is the Pressure Rating of that Flange!? - EBAA Iron, Inc.

    ASME/ANSI B16.1-1989 “Cast Iron Pipe Flanges and Flanged Fittings”. - ASME/ANSI Page 2 B16.5. Var. Nickel Alloys. 90-290. 100. B16.5. Var. Carbon Steels. 140. 600. B16.5. Var. the way Class 125 and Class 150 flanges have the same flange inch size with the same wall thickness as the flanged fittings, have a

  • 15010 - Mill Piping - Exposed and Buried - City of San Diego

    2. ANSI/ASME B16.4. Cast Iron Threaded Fittings, Class 125 and 250. 3. ANSI B16.5. Pipe Flanges and Flanged Fittings, Steel Nickel Alloy and Other. Special Alloys. 4. Specification for Seamless Carbon Steel Pipe for High E. Gaskets for chlorine and sulfur dioxide service flanges shall be 1/16-inch, high temperature.

  • NEWCO - Cast Steel Bolted Bonnet Valves - Superior Valve Co.

    Flange Dimensions - ANSI B16.5 . . and sells Gate, Globe, Check, Ball, and Triple Offset valves ranging in sizes from 1/4” thru 120” ANSI Class 125 thru 4500 lbs. . 2. Newco Cast Carbon Steel Bolted Bonnet Valves. Product Line Technical Data applications in horizontal flow piping. Flange Dimensions in Inches.

  • American Flanged Pipe - EJ Prescott

    1—Ductile iron flange; 2—Ductile iron Toruseal? gaskets may be used with steel pipe flanges in the 14"-54" sizes Weight lbs. Approx. Bolt Torque** ft.-lbs. Pipe Size in. Pressure. Rating* psi Bolts, studs and nuts are low-carbon steel match those of ANSI B16.1 Class 125 flanges and ANSI B16.5 Class 150 flanges.

  • 7041 MODEL 7041 FLANGE ADAPTER – ANSI CLASS 125/150

    Working Pressure is based on roll grooved standard wall carbon steel pipe. Model 7041 Flange Adapter - ANSI Class 125/150 . Note: Hydrostatic shell test: 450 psi (30 Bar) per ANSI B16.5 Model 7041 Flange Adapter - ANSI Class 125 / 150. Nom. Size. Bolt. Required Torque in. No. Size (in). Lbs-Ft. Nm. 2. 4. ?. 110 ~

  • Technical Note PP 811-TN PE Flange - Performance Pipe

    behind the flange adapter's sealing surface flange as shown in Figure 2-1 and bolted to the drilling. Other available back-up ring materials are steel, primer-coated steel; epoxy coated steel rings are ANSI Class 125 for gravity . Table 2-2 Flange Dimensions (Inch. Sized) ANSI B16.5 Class 1501. IPS. Pipe. Size. Flange.


Related Articles